P1347
FordFuel Level Sensor B Range / Performance
Fuel Level Sensor B helps report how much fuel is in the tank. This code means the vehicle detected a signal from sensor B that is outside its expected range or is not behaving as expected. It may affect the fuel gauge or estimated driving range, but the code alone does not prove the sensor needs replacement.
⚠️ Before You Begin (Safety First)
If the gauge or range estimate is unreliable, do not rely on it to judge how much fuel remains; refuel early. Stop driving if the engine stalls or you notice a fuel leak or strong fuel smell.
Common Symptoms
- The fuel gauge may read inaccurately or change unpredictably if the sensor B signal does not reflect the fuel level.
- The estimated driving range or low-fuel indication may be unreliable, depending on how the vehicle uses sensor B data.
- There may be no obvious symptom if the vehicle continues to display a plausible fuel level.
Common Causes
- Fuel Level Sensor B may be worn, damaged, or producing an inconsistent signal.
- A loose, corroded, or damaged connector or wiring in the sensor B circuit may interfere with its signal.
- A circuit ground or other electrical connection may be poor, where applicable to the vehicle's design.
- The signal may be affected by a fault elsewhere in the fuel-level circuit or by a problem interpreting the signal.
Diagnostic Steps
- Check whether the fuel gauge or range estimate behaves inconsistently, and note when it happens; this helps distinguish a persistent reading issue from an intermittent one.
- With the vehicle safely parked and switched off, visually inspect accessible fuel-level wiring and connectors for looseness or visible damage. Do not open the fuel tank or work near fuel vapors.
- If safe and practical, compare the displayed fuel level before and after adding a known amount of fuel. Treat this only as an observation, not proof of which component has failed.
- Have the code and available fuel-level scan data checked against model-, year-, and engine-specific service information before parts are replaced.
When to Call a Professional
Use vehicle-specific service information to identify the sensor B signal and its expected behavior. Compare scan data with the displayed fuel level and the actual fuel quantity, then inspect the relevant wiring and connectors. Test the circuit using the correct procedure before replacing a sensor.
Compare component listings
Confirm diagnosis and vehicle fitment before buying. A listing does not prove that a part needs replacement. We may earn a commission from qualifying purchases.
Commonly Asked Questions
Does P1347 prove that Fuel Level Sensor B is bad?
No. It identifies an out-of-range or poor-performing signal condition, not the failed part. Wiring, connectors, or another issue in the signal path may be responsible.
Can this code affect how the vehicle drives?
It most directly concerns fuel-level information, so the gauge or range estimate may be unreliable. If the engine stalls or runs out of fuel, stop safely and address that condition.
What does sensor B mean?
It identifies a particular fuel-level sensor signal in the vehicle's system. Its exact arrangement and location depend on the model, year, and engine.
Should I replace the sensor before checking the wiring?
No. Check the sensor B circuit and its connections using vehicle-specific service information before deciding what needs replacement.
Browse Available Code Guides
Previous and next available guides in database record order, across makes. Adjacent entries may share a code number and do not necessarily describe related faults.