P1464
FordA/C Demand Out of Self Test Range
During a self-test, the Ford control system detected an A/C demand signal outside the expected range. That signal tells the system when A/C is being requested; this code does not prove the compressor or any other particular part has failed. Exact operation depends on the vehicle's model, year and engine.
⚠️ Before You Begin (Safety First)
This code alone usually does not make the vehicle unsafe to drive. Stop driving if a separate issue causes engine overheating, severe drivability problems or another immediate safety concern. Do not open refrigerant lines or handle refrigerant; have that work done with proper equipment.
Common Symptoms
- There may be no noticeable symptom if the code was recorded only during a self-test.
- The A/C may not engage, or its operation may be inconsistent, if the system is not receiving the A/C request correctly.
- Engine idle response may differ when A/C is requested if the control system does not recognize the demand signal.
Common Causes
- A/C demand input signal is outside the expected range during the self-test.
- A problem with the A/C request switch or control-panel signal may cause an incorrect demand input.
- A loose, damaged or corroded connection, or a fault in the related wiring, may interrupt or alter the signal.
- The code may reflect self-test status or test conditions rather than a confirmed failed component.
Diagnostic Steps
- Note when the code appears and whether the A/C works normally; this helps distinguish a self-test-only finding from an operating problem.
- With the vehicle safely parked, check that the A/C controls respond consistently when selecting A/C on and off.
- With the ignition off, visually inspect accessible connectors and wiring around the A/C controls and related engine-control connections for looseness or visible damage. Do not force connectors or probe terminals.
- If the code returns or A/C operation is affected, have the A/C demand status and related circuit checked against model-specific service information.
When to Call a Professional
Check the model-specific wiring information and monitor the A/C demand input during the applicable self-test. Compare the control-panel request with the PCM-reported status, then inspect the relevant circuit and connections using vehicle-specific procedures and specifications. Confirm the fault before replacing parts.
Compare component listings
Confirm diagnosis and vehicle fitment before buying. A listing does not prove that a part needs replacement. We may earn a commission from qualifying purchases.
Commonly Asked Questions
Does P1464 mean the A/C compressor has failed?
No. It identifies an A/C demand signal outside the expected range during a self-test. The compressor and the request-input circuit are different parts of the system, so diagnose the signal before replacing anything.
Can this code appear when the A/C seems to work normally?
Yes. The code may be limited to a self-test result, and a stored code does not necessarily mean there is a current, noticeable operating problem.
What should be checked first?
Confirm whether the code returns and whether A/C operation is affected. A technician can compare the control-panel request with the PCM-reported A/C demand status and inspect the associated circuit.
Can I keep driving with P1464?
This code alone generally does not prevent normal driving. Pay attention to other symptoms or warning codes, and stop if a separate problem makes the vehicle unsafe.
Browse Available Code Guides
Previous and next available guides in database record order, across makes. Adjacent entries may share a code number and do not necessarily describe related faults.