U0132

Universal

Lost Communication With Ride Level Control Module

Definition source: General OBD-II reference catalog
Definition verification: Not independently verified for display.
Time: Varies by diagnosis and vehicle | Diagnostic difficulty: Medium
Medium Severity

The vehicle has detected that it cannot communicate with the ride level control module, which manages or monitors ride-height functions on vehicles equipped with that system. Ride-height adjustment or related warnings may be affected, but this code alone does not prove the module has failed. Some vehicles may show no noticeable symptoms.

Report an error with this code

⚠️ Before You Begin (Safety First)

If the vehicle is sitting unusually low or high, feels unstable, or has a suspension warning, avoid high-speed driving and stop somewhere safe if handling seems unsafe. Do not work beneath a vehicle supported only by its suspension or a jack; use proper support and follow the vehicle's service information.

Common Symptoms

  • A suspension or ride-height warning may appear if another module reports that communication with the ride level control module is missing.
  • The vehicle may not raise or lower as expected if ride-height adjustment depends on the module.
  • Ride height may remain at a default setting, depending on the vehicle's system response.
  • There may be no noticeable symptoms if the system is not actively needed or the communication interruption is temporary.

Common Causes

  • The ride level control module may have lost power or ground because of a supply, connection, or fuse problem.
  • A loose, damaged, corroded, or wet connector or wiring may interrupt communication.
  • A fault in the vehicle communication network or another connected module may prevent messages from reaching the ride level control module.
  • The ride level control module may have an internal fault, but the code alone does not establish that.

Diagnostic Steps

  1. Check the owner's manual to confirm whether the vehicle is equipped with ride level control and identify any related warning messages.
  2. With the vehicle parked safely, note whether its ride height looks unusual and whether the warning appears consistently; do not drive if handling or clearance seems unsafe.
  3. Check the battery condition and look for other warning lights or electrical problems, since low or unstable vehicle voltage can affect module communication.
  4. If the manual identifies an accessible related fuse, inspect it using the manual's instructions. Replace only with the specified type and rating; if it fails again, seek diagnosis rather than repeatedly replacing it.
  5. With the vehicle off, visually inspect accessible ride-level-system wiring and connectors for looseness, damage, or corrosion. Do not probe wiring or work under an unsupported vehicle.
  6. Have all modules scanned for related codes if the warning persists; a scan of only the engine controller may not show the full communication fault.

When to Call a Professional

A technician can scan all modules for related communication and voltage codes, then check the ride level control module's power, grounds, connectors, and network wiring using vehicle-specific service information. Confirm the network and module operation before considering module replacement.

Compare component listings

Confirm diagnosis and vehicle fitment before buying. A listing does not prove that a part needs replacement. We may earn a commission from qualifying purchases.

Search Amazon Search eBay

Commonly Asked Questions

Does U0132 mean the ride level control module must be replaced?

No. It indicates lost communication with that module, which can also result from a power, ground, wiring, connector, or network problem. Testing is needed before replacing parts.

Can I drive with U0132?

It depends on how the vehicle behaves. If ride height is abnormal, handling feels unstable, or a suspension warning appears, avoid driving until it is checked. If there are no symptoms, arrange diagnosis and follow any vehicle warnings.

Why might there be no symptoms?

A communication interruption may be temporary, or the vehicle may not need to adjust ride height under current conditions. The code can still be useful evidence for diagnosis.

What should be checked before the module?

Check for related codes across vehicle modules, then verify the module's power and ground, connector condition, and communication wiring using service information for the specific vehicle.

Browse Available Code Guides

Previous and next available guides in database record order, across makes. Adjacent entries may share a code number and do not necessarily describe related faults.