U0150

Universal

Lost Communication With Gateway E

Definition source: General OBD-II reference catalog
Definition verification: Not independently verified for display.
Time: Varies by diagnosis and vehicle | Diagnostic difficulty: Medium
Medium Severity

A vehicle control module detected that it could not communicate with Gateway E. A gateway normally passes messages between parts of the vehicle’s electronic network. The code points to a communication problem, not proof that the gateway itself has failed. Depending on the vehicle and which messages are affected, some features or warning indicators may not work; there may also be no noticeable symptoms.

Report an error with this code

⚠️ Before You Begin (Safety First)

If the code appears with warnings or loss of braking, steering, restraint, or other essential functions, stop somewhere safe and arrange qualified service. Do not probe network wiring or disconnect modules unless the vehicle-specific service information says it is safe to do so.

Common Symptoms

  • There may be no noticeable symptoms if the communication interruption was brief or did not affect a feature the driver uses.
  • One or more warning lamps or messages may appear if other modules cannot receive information routed through the gateway.
  • Some electronic features may become unavailable or behave unexpectedly, depending on which network messages are affected.
  • Other communication codes may be present if the problem affects more than one module or network connection.

Common Causes

  • A temporary interruption in vehicle network communication.
  • Low or unstable vehicle battery voltage or a charging-system problem affecting module operation.
  • A loose, damaged, corroded, or poorly connected power, ground, or network connection.
  • A wiring or network fault that interrupts messages to or from Gateway E.
  • A gateway or another control module that is not operating or communicating correctly; the code alone does not identify which module is at fault.

Diagnostic Steps

  1. Record the warning messages, symptoms, and when they occur. This can help distinguish a persistent fault from a brief interruption.
  2. If you have a suitable scan tool, record all module codes and whether they are current or stored before clearing anything. Related codes can help narrow down the affected network or modules.
  3. With the vehicle parked safely and switched off, visually check the battery terminals for looseness or obvious corrosion. Do not work around damaged wiring or terminals.
  4. Check only the fuses listed for relevant electronic systems in the owner’s manual, using its stated procedure. Replace a fuse only with the specified type and rating; if it fails again, seek service.
  5. Look for accessible wiring or connectors that are visibly damaged or displaced, without unplugging modules or disturbing safety-system wiring.
  6. If the code returns, or essential features are affected, have a qualified technician test the gateway power, ground, and network communication using vehicle-specific service information.

When to Call a Professional

A technician can scan all available modules, identify which ones report communication loss, and determine whether the code is current or stored. They can then check battery and charging condition, gateway power and ground, and network wiring and signals using vehicle-specific service information. Confirm the cause before replacing a module.

Compare component listings

Confirm diagnosis and vehicle fitment before buying. A listing does not prove that a part needs replacement. We may earn a commission from qualifying purchases.

Search Amazon Search eBay

Commonly Asked Questions

Does U0150 prove that Gateway E needs replacement?

No. It records a loss of communication, which can result from power, ground, wiring, network, voltage, or module problems. Testing is needed to identify the cause.

Can the vehicle have this code without noticeable symptoms?

Yes. A brief or limited communication interruption may leave no obvious symptoms, though the code can still be stored.

Why should other module codes be checked?

Codes from multiple modules can show whether communication loss is widespread or limited to one area. That context helps avoid replacing a gateway based on this code alone.

Is it safe to keep driving?

That depends on the vehicle’s behavior and warning indicators. If braking, steering, restraint, or another essential function is impaired, stop safely and arrange service. Exact applicability and procedures depend on the vehicle’s model, year, and engine.

Browse Available Code Guides

Previous and next available guides in database record order, across makes. Adjacent entries may share a code number and do not necessarily describe related faults.